How to Repair a Saab 93 Key Fob
The key fob of your Saab 9-3 could have a faulty chip. The metal part of classic car keys is simple to copy. Modern key fobs, however, have an immobilizer to protect your vehicle.
The first step in determining the reason your key fob isn't working is to replace the coin battery. It's a low-cost and simple fix.
How to program the Saab 93 Key Fob
Saab keys let you to control the doors, trunk, and engine of your car. They also unlock the fuel door as well as activate a panic button. Remotes can be programmed by synchronizing them with the vehicle's transmitter. To do this, place the key in the ignition and turn it to the ON position. Follow the instructions on the Tech2 until you have programmed all of the keys you want to work with the vehicle.
Saabs are often sold with only one key, despite the fact that they were originally designed with two keys. You can add another key by replacing the transmitter (which includes the transponder) and programming it in using a handheld computer dubbed a Tech-2 at your Saab dealer. To make it work you'll require a matching key. This is a pricey task however it's cheaper than replacing the entire CIM system and locking cylinders should you have lost the only key you can use.
Saab 93 replacement key fob
Saab owners who have lost their one key should get an extra one as soon a possible. The key fob is not as traditional keys made of metal used in cars 20 years ago, but it is an electronic device that connects to the car via a unique chip. This is how the car detects the key fob and stops it from being copied. It is possible to do this at an auto dealer, but the price can be expensive. You can avoid this problem by purchasing a new Saab key online.
The main reason you should have an additional key is to protect your vehicle if you should lose it. A burglar is more likely find a spare key than one that was stolen. The majority of thieves don't have the tools required to copy these modern keys. Even if they did have a specific machine, it would not be foolproof.
A spare key will save you money in the event of replacing the SAAB 9-3 remote's battery. All electronic units in the keyfob come with batteries and eventually, they will fail. It is simple to replace the battery, however it is important to take care not to damage the electronics inside the case. You can watch videos on Youtube to learn how to do this task, including those by Cyclone Cyd.
Saab 93 key fob battery
It's probably time to replace the battery on your key fob If you've noticed the response time is slow. While there could be other causes behind the delay but a dead battery is the most likely cause. It's a quick and easy fix, so don't wait.
To remove the backup key, you must first remove the fob. To do this, push firmly on the Saab Logo and pull the key ring loop. Then, place an flathead screwdriver into the indentation on the key fob case. Turn the screwdriver around to separate the case. The plastic shouldn't be damaged if you don't use too much force.
Once saab 93 key replacement has been opened, you can see the electronic components inside. The circuit board is attached to the retaining clips made of steel. If these are rusty and dirty the fob won't work properly. Clean them with ruby alcohol. This is a temporary solution. The clips will eventually wear down and require to be replaced.
Test the car door locks with your backup remote before you replace the battery. If it's working properly it's probably a problem with your main key fob. Replacing the battery should resolve the issue, but if experiencing delays whenever you lock or unlock the doors, it's possible that something else is wrong with the car.
Saab keyfob 93 case
If your key fob's case is showing signs of wear it is a good idea to purchase a replacement. These are available online and can be easily attached to your existing remote control. All you need is a flathead screwdriver and a little patience. Insert the flathead screwdriver in the slot located in the middle of the case and then gently split it open. Be sure not to damage the limiters holding the battery in place. The new case will be installed in the existing electronics after taking out the emergency badge and key. It will require no programming.
The best key fob case features a lining specifically designed to stops signals from being sent to the key fob. This is important, because it's the signals that enable your vehicle to start. Certain cases have silver layers, while others are made of copper to help distort transmissions more effectively.
Key fobs are an excellent way to safeguard your keys. It can help you keep track of your keys, and help you find them in the dark while you're heading to your car. A quality key fob cover will protect your keys from theft, and can also add a touch of style to your keychain.